Skip to Content
 

Unistrut P3001T – 1-5/8″ Channel- P3000 Variation

  • P3001T-Pre Galvanized Zinc-20'

    Pregalvanized Zinc (PG) — This coating is a well-proven, time tested performer for indoor and outdoor applications required a moderate amount of corrosion resistance. Please Note: We also offer volume discounts on larger orders. Please contact Unistrut Service Company for a custom quote on your bulk order.

    *
    *
    • Some cutting jobs allow us to use ground shipping rather than LTL, yielding significant freight savings. A customer service associate will contact you to confirm the cut list and shipping and freight costs prior to finalizing your order.
    • eg - 4 cuts per stick x 5ft per section

    Call for pricing
    1-800-694-9274

    Product Specifications

    Have a larger project in mind?

    Check out our cutting, kitting, and bundling as well as our assembly and fabrication services. Or give one of our engineers a call.


Products specifications
Unistrut Metal Framing 1-5/8"

Unistrut P3001T – 1-5/8" x 2 3/4", 12 Gage, Back-to-Back, Slotted P3000 Variation

Genuine UNISTRUT Brand

Unistrut P3001T – 1-5/8″ Channel- P3000 Variation

Need a Large Volume Quote?

Whether it's for materials or services and applications for your project, we're happy to provide a quote to get you started.

We have the Resources

Check out our PDFs, CAD drawings, blog posts and more.

Have a Question?

We're happy to help with your project any way we can.

Notes:

  • Above loads include the weight of the member. This weight must be deducted to arrive at the net allowable load the beam will support.
  • Long span beams should be supported so as to prevent rotation and twist.
  • Allowable uniformly distributed loads are listed for various simple spans, that is, a beam on two supports. If load is concentrated at the center of the span, multiply load from the table by 0.5 and corresponding deflection by 0.8.
  • The lateral bracing factor should be multiplied by the load to determine the load retained based on the distance between lateral braces.