Skip to Content
 
You have no items in your shopping cart.
Cart
You have no items in your shopping cart.
Request a Quote Request a Quote 1-800-694-9274
Menu
Picture of Unistrut P3000 - 1-5/8" Solid Channel

Unistrut P3000 - 1-5/8" Solid Channel

  • P3000-Perma-Green-10'

    Perma-Green® III / Powder Coat Green (GR) — A thermoset acrylic finish that provides superior resistance to chalking, checking, and fading and is far less vulnerable to common acid atmospheres, solvents, and alkalais. Perma-Green offers more corrosion resistance than the plain finish but offers less protection to the elements than pregalvanized, hot dipped galvanized, and Defender finishes.Please Note: We also offer volume discounts on larger orders. Please contact Unistrut Service Company for a custom quote on your bulk order.

    *
    *
    • Some cutting jobs allow us to use ground shipping rather than LTL, yielding significant freight savings. A customer service associate will contact you to confirm the cut list and shipping and freight costs prior to finalizing your order.
    • eg - 4 cuts per stick x 5ft per section

    Call for pricing
    1-800-694-9274

    Request a Quote

    Have a larger project in mind?

    Check out our cutting, kitting, and bundling as well as our assembly and fabrication services. Or give one of our engineers a call.

  • P3000-Perma-Green-20'

    Perma-Green® III / Powder Coat Green (GR) — A thermoset acrylic finish that provides superior resistance to chalking, checking, and fading and is far less vulnerable to common acid atmospheres, solvents, and alkalais. Perma-Green offers more corrosion resistance than the plain finish but offers less protection to the elements than pregalvanized, hot dipped galvanized, and Defender finishes.Please Note: We also offer volume discounts on larger orders. Please contact Unistrut Service Company for a custom quote on your bulk order.

    *
    *
    • Some cutting jobs allow us to use ground shipping rather than LTL, yielding significant freight savings. A customer service associate will contact you to confirm the cut list and shipping and freight costs prior to finalizing your order.
    • eg - 4 cuts per stick x 5ft per section

    Call for pricing
    1-800-694-9274

    Request a Quote

    Have a larger project in mind?

    Check out our cutting, kitting, and bundling as well as our assembly and fabrication services. Or give one of our engineers a call.

  • P3000-Pre-Galvanized Zinc-10'

    Pregalvanized Zinc (PG) — This coating is a well-proven, time tested performer for indoor and outdoor applications required a moderate amount of corrosion resistance. Please Note: We also offer volume discounts on larger orders. Please contact Unistrut Service Company for a custom quote on your bulk order.

    *
    *
    • Some cutting jobs allow us to use ground shipping rather than LTL, yielding significant freight savings. A customer service associate will contact you to confirm the cut list and shipping and freight costs prior to finalizing your order.
    • eg - 4 cuts per stick x 5ft per section
    $74.23
    Request a Quote

    Have a larger project in mind?

    Check out our cutting, kitting, and bundling as well as our assembly and fabrication services. Or give one of our engineers a call.

  • P3000-Pre-Galvanized Zinc-20'

    Pregalvanized Zinc (PG) — This coating is a well-proven, time tested performer for indoor and outdoor applications required a moderate amount of corrosion resistance. Please Note: We also offer volume discounts on larger orders. Please contact Unistrut Service Company for a custom quote on your bulk order.

    *
    *
    • Some cutting jobs allow us to use ground shipping rather than LTL, yielding significant freight savings. A customer service associate will contact you to confirm the cut list and shipping and freight costs prior to finalizing your order.
    • eg - 4 cuts per stick x 5ft per section
    $148.47
    Request a Quote

    Have a larger project in mind?

    Check out our cutting, kitting, and bundling as well as our assembly and fabrication services. Or give one of our engineers a call.

  • P3000-Hot-Dipped Galvanized-10'

    Hot Dipped Galvanized (HG) — For severe corrosion applications, material treated with the hot dipped galvanized process results in complete zinc coverage and a thicker coating than pregalvanized or plated zinc. Please Note: We also offer volume discounts on larger orders. Please contact Unistrut Service Company for a custom quote on your bulk order.

    *
    *
    • Some cutting jobs allow us to use ground shipping rather than LTL, yielding significant freight savings. A customer service associate will contact you to confirm the cut list and shipping and freight costs prior to finalizing your order.
    • eg - 4 cuts per stick x 5ft per section
    $153.43
    Request a Quote

    Have a larger project in mind?

    Check out our cutting, kitting, and bundling as well as our assembly and fabrication services. Or give one of our engineers a call.

  • P3000-Hot-Dipped Galvanized-20'

    Hot Dipped Galvanized (HG) — For severe corrosion applications, material treated with the hot dipped galvanized process results in complete zinc coverage and a thicker coating than pregalvanized or plated zinc. Please Note: We also offer volume discounts on larger orders. Please contact Unistrut Service Company for a custom quote on your bulk order.

    *
    *
    • Some cutting jobs allow us to use ground shipping rather than LTL, yielding significant freight savings. A customer service associate will contact you to confirm the cut list and shipping and freight costs prior to finalizing your order.
    • eg - 4 cuts per stick x 5ft per section

    Call for pricing
    1-800-694-9274

    Request a Quote

    Have a larger project in mind?

    Check out our cutting, kitting, and bundling as well as our assembly and fabrication services. Or give one of our engineers a call.

  • P3000-Plain-10'

    Plain (PL)--The plain finish designation means that the channel retains the oiled surface applied to the raw steel during the rolling process. The fittings have the original oiled surface of the coil or strip steel material. Plain finish is ideal if you plan to weld the material. Please Note: We also offer volume discounts on larger orders. Please contact Unistrut Service Company for a custom quote on your bulk order.

    *
    *
    • Some cutting jobs allow us to use ground shipping rather than LTL, yielding significant freight savings. A customer service associate will contact you to confirm the cut list and shipping and freight costs prior to finalizing your order.
    • eg - 4 cuts per stick x 5ft per section
    $74.23
    Request a Quote

    Have a larger project in mind?

    Check out our cutting, kitting, and bundling as well as our assembly and fabrication services. Or give one of our engineers a call.

  • P3000-304 Stainless Steel-10'

    P3000-304 Stainless Steel-10'

    *
    *
    • Some cutting jobs allow us to use ground shipping rather than LTL, yielding significant freight savings. A customer service associate will contact you to confirm the cut list and shipping and freight costs prior to finalizing your order.
    • eg - 4 cuts per stick x 5ft per section

    Call for pricing
    1-800-694-9274

    Request a Quote

    Have a larger project in mind?

    Check out our cutting, kitting, and bundling as well as our assembly and fabrication services. Or give one of our engineers a call.

  • P3000-304 Stainless Steel-20'

    P3000-304 Stainless Steel-20'

    *
    *
    • Some cutting jobs allow us to use ground shipping rather than LTL, yielding significant freight savings. A customer service associate will contact you to confirm the cut list and shipping and freight costs prior to finalizing your order.
    • eg - 4 cuts per stick x 5ft per section

    Call for pricing
    1-800-694-9274

    Request a Quote

    Have a larger project in mind?

    Check out our cutting, kitting, and bundling as well as our assembly and fabrication services. Or give one of our engineers a call.

  • P3000-316 Stainless Steel-10'

    P3000-316 Stainless Steel-10'

    *
    *
    • Some cutting jobs allow us to use ground shipping rather than LTL, yielding significant freight savings. A customer service associate will contact you to confirm the cut list and shipping and freight costs prior to finalizing your order.
    • eg - 4 cuts per stick x 5ft per section

    Call for pricing
    1-800-694-9274

    Request a Quote

    Have a larger project in mind?

    Check out our cutting, kitting, and bundling as well as our assembly and fabrication services. Or give one of our engineers a call.

  • P3000-316 Stainless Steel-20'

    P3000-316 Stainless Steel-20'

    *
    *
    • Some cutting jobs allow us to use ground shipping rather than LTL, yielding significant freight savings. A customer service associate will contact you to confirm the cut list and shipping and freight costs prior to finalizing your order.
    • eg - 4 cuts per stick x 5ft per section

    Call for pricing
    1-800-694-9274

    Request a Quote

    Have a larger project in mind?

    Check out our cutting, kitting, and bundling as well as our assembly and fabrication services. Or give one of our engineers a call.

  • P3000-Plain-20'

    Plain (PL)--The plain finish designation means that the channel retains the oiled surface applied to the raw steel during the rolling process. The fittings have the original oiled surface of the coil or strip steel material. Plain finish is ideal if you plan to weld the material. Please Note: We also offer volume discounts on larger orders. Please contact Unistrut Service Company for a custom quote on your bulk order.

    *
    *
    • Some cutting jobs allow us to use ground shipping rather than LTL, yielding significant freight savings. A customer service associate will contact you to confirm the cut list and shipping and freight costs prior to finalizing your order.
    • eg - 4 cuts per stick x 5ft per section
    $148.47
    Request a Quote

    Have a larger project in mind?

    Check out our cutting, kitting, and bundling as well as our assembly and fabrication services. Or give one of our engineers a call.

The Unistrut P3000 is a 1-5/8″ x 1-3/8″ channel. It is slightly shorter than the P1000 and has a 12 ga (.105″) wall.

1-5/8″ x 1-3/8″, 12 Gauge, Solid--1.70 lbs/ft.

Browse Related Products

free ground shipping on fittings & channel nuts when you spend $35 or more! *Exclusions Apply

Beam Loading - P3300
Span 
(in)		 Max Allow. Uniform Load 
(lbs)		 Deflection at Uniform Load 
(in)		 Uniform Loading at Deflection Lateral Bracing Reduction Factor
Span/180 
(lbs)		 Span/240 
(lbs)		 Span/360 
(lbs)
24 600 0.10 600 600 400 1.00
36 400 0.22 360 270 180 1.00
48 300 0.40 200 150 100 1.00
60 240 0.62 130 100 60 0.98
72 200 0.89 90 70 40 0.97
84 170 1.20 70 50 30 0.96
96 150 1.59 50 40 30 0.94
108 130 1.96 40 30 20 0.93
120 120 2.48 30 20 20 0.92
Column Loading - P3300
Unbraced 
Height 
(in)		 Allowable 
Load at Slot Face 
(lbs)		 Max Column Load Applied at C.G.
K=0.65 (lbs) K=0.80 (lbs) K=1.0 (lbs) K=1.2 (lbs)
24 2,360 7,740 7,260 6,350 5,390
36 2,120 6,470 5,390 3,990 2,810
48 1,760 4,910 3,550 2,270 1,580
60 1,380 3,440 2,270 1,460 KL/r>200
72 1,080 2,390 1,580 KL/r>200 KL/r>200

Notes:

1. Beam loads are given in total uniform load (W Lbs) not uniform load (w lbs/ft or w lbs/in).

2. Beam loads are based on a simple span and assumed to be adequately laterally braced. Unbraced spans can reduce beam load carrying capacity. Refer to the linked page for reduction factors for unbraced lengths from 2 to 20 feet.

3. For pierced channel, multiply beam loads by the following factor:

  • "KO" Series .......95%
  • "T" Series ..........85%
  • "HS" Series .......90%
  • "SL" Series ........85%
  • "H3" Series ........90%
  • "DS" Series ........70%

4. Deduct channel weight from the beam loads.

5. For concentrated midspan point loads, multiply beam loads by 50% and the corresponding deflection by 80%. Follow this link for information regarding other load conditions.

6. All beam loads are for bending about Axis 1-1.

Sample calculation #1:

Here is a sample calculation to demonstrate the beam loading charts, and the load reduction factors.

Say we have an 6' span of P1000sl, and want to see what the load capacity is for a point load.

Per the charts, P1000 is good for a maximum allowable uniform load (not load per foot) of 560 lbs. In referencing the notes below, we have the following load reductions:

- X .85 for the sl

- X .5 for a point load in the center

- X .78 load reduction per page 56

Therefore 560 lbs x .85 x .5 x .78 = 185 lbs.

Sample Calculation #2.

Say we have a 5' span of P1001, and want to see the load capacity for a point load.

Per the charts, p1001 is good for a maximum allowable uniform load (not load per foot) of 1,910 lbs. In referencing the notes below, we have the following load reductions:

- X .5 for a point load in the center

- X .97 load reduction

Therefore 1,910 lbs x .5 x. 97 = 926 lbs.

Note that these assume that the strut connection is able to handle the load. It is the responsibility of you and your Engineer to review all calculations and connections, and to verify that all items are installed per Unistrut requirements. Unistrut Service Company takes no responsibility for the misuse of information provided. Local codes may dictate more stringent requirements.