Skip to Content
 

Blog

Unistrut 90 Degree Fittings for 1-5/8" Strut

Unistrut 90 Degree Fittings for 1-5/8" Strut

Every project you build with Unistrut requires channel AND fittings, but in many instances, folks get overwhelmed by the number of fittings choices.  

This post offers some basic information on 90 degree Unistrut fittings and offers links to product detail pages where you can learn more about a particular part number and request a quote.

Whether you need a basic, angled two-hole fitting, a bracket with holes and slots, or a gusseted right angle fitting for added strength, the Unistrut catalog contains a diverse and varied family of 90 degree fittings designed to make short work of your project.  Each of the pages on our website dedicated to Unistrut angular fittings contains detailed product information on finishes, materials, sizes, and ordering information.  You’ll also find a submittal PDF for each part number.

 

Unistrut 1-5/8" 90 degree fittings

Below, are some quick additional pointers on 1-5/8″ compatible 90 degree fittings for handy reference:

MATERIAL
Fittings, unless noted, are made from hot-rolled, pickled and oiled steel plates, bar, strip or coil, and conform to one or more of the following specifications: ASTM specifications A575, A576, A635, A1011 SS GR 33, A1011 HSLAS GR 45 or A36. All fittings meet or exceed physical properties of ASTM A1011 GR 33. The pickling of the steel produces a smooth surface free from scale. Many fittings are also available in stainless steel, aluminum and fiberglass.

APPLICATION
All parts drawings in the catalog and on our website illustrate only one application of each fitting. In most cases many other applications are possible. The channels shown in the illustrations are P1000, 15⁄8″ square, except where noted otherwise. All 9⁄16″ diameter holes use 1⁄2″ x 15⁄16″ hex head cap screws and 1⁄2″ nuts – P1010, P3010, P4010 or P5510 – depending on the channel used. Nuts and bolts are not included with the fitting and must be ordered separately.

DIMENSIONS
Imperial dimensions illustrated in the catalog and on the web site are in inches, and metric dimensions are shown in parenthesis. Unless noted, all metric dimensions are in millimeters and rounded to one decimal place

DESIGN LOAD
Design load data, where shown, is based on the ultimate strength of the connection with a safety factor of 2.5, unless otherwise noted.

 

Bolt Torque for 1-5/8" Fittings
Bolt Size 1/4"-20 5/16" -18 3/8"-16 1/2"-13 5/8"-11 3/4"-10
Rec. Torque Ft/Lbs 6 11 19 50 100 125
Max Torque
Ft/Lbs
7 15 25 70 125 135
Set Screw Torque for 1-5/8" Fittings
Bolt Size 1/4"-20 3/8"-16 1/2"-13 5/8"-11 3/4"-10 7/8"-9
Set Screw Torque Ft/Lbs 40 60 125 250 400 665
Links to Popular 90 Degree Fittings Available from Unistrut Service Company
P1026 P1068 P1325
P1326 P1346 P1458
P2484 P1546 P1038

To learn more about 90 degree fittings, consult page 77 of the General Engineering Catalog, or visit the Angled 1-5/8″ Fittings section of our website.  And as always, to request pricing, or place an order, contact Unistrut Service Company for further assistance.