S-5! Metal Roof Attachment Clamps
Filter by:
Clear All
Attach almost anything to standing seam metal roofs without piercing the panel with S-5! roof clamps.
Metal roof attachment clamps from S-5! are designed and lab tested for virtually any architectural or metal building panel profile on the market. Holding strength of S-5! clamps vary with different seam profiles, material types and gauges, with ultimate load-to-failure averages of over 1,800 pounds. Load-to-failure values exceeding 4,000 pounds are achieved in some cases.
- S-5! clamps do not violate panels’ thermal movement or void roof system warranties
- Unequaled holding strength
- No premature corrosion
- S-5! clamps are recommended by all leading metal building and metal panel manufacturers
S-5! S-5-H90 Attachment Clamps for Horizontal Seam Metal Roofs
The S-5-H90 is a one-piece clamp that was developed to securely and cost-effectively accommodate metal roof panels with a horizontal seam greater than 0.65″. Turning the clamp 90 degrees so that the bolt hole side is facing up, slip the clamp on the seam and tighten the setscrews.
S-5! S-5-H90 Mini Attachment Clamps for Horizontal Seam Metal Roofs
The S-5-H90 is a one-piece clamp that was developed to securely and cost-effectively accommodate metal roof panels with a horizontal seam greater than 0.65″. Turning the clamp 90 degrees so that the bolt hole side is facing up, slip the clamp on the seam and tighten the setscrews.
S-5! S-5-N 1.5 Attachment Clamps for Nail Strip Metal Roofs
The S-5-N 1.5 and S-5-N 1.5 Mini clamps were designed with S-5!® zero-penetration technology for application on the popular 1.5″ nail strip metal roof profiles and roofing types with similar profiles.
S-5! S-5-N 1.5 Mini Attachment Clamps For Metal Nail Strip Roofs
The S-5-N 1.5 and S-5-N 1.5 Mini clamps were designed with S-5!® zero-penetration technology for application on the popular 1.5″ nail strip metal roof profiles and roofing types with similar profiles.
