Skip to Content
 
Cart
You have no items in your shopping cart.
Contact Us 1-800-694-9274

S-5! Metal Roof Attachment Clamps

Picture for category S-5! Metal Roof Attachment Clamps banner image

Attach almost anything to standing seam metal roofs without piercing the panel with S-5! roof clamps.

Metal roof attachment clamps from S-5! are designed and lab tested for virtually any architectural or metal building panel profile on the market. Holding strength of S-5! clamps vary with different seam profiles, material types and gauges, with ultimate load-to-failure averages of over 1,800 pounds. Load-to-failure values exceeding 4,000 pounds are achieved in some cases.

  • S-5! clamps do not violate panels’ thermal movement or void roof system warranties
  • Unequaled holding strength
  • No premature corrosion
  • S-5! clamps are recommended by all leading metal building and metal panel manufacturers
Display per page

S-5! S-5-E Metal Roof Attachment Clamps for Double Folded Profiles

The S-5-E is designed specially for double-folded standing seam roofs that are popular in Europe and in the US. The S-5-E is a bit smaller and less expensive than the S-5-U, but every bit as strong. Designed to fit Butler's MR-24 and other double folded standing seam roofs.
From $4.51

The S-5-E is designed specially for double-folded standing seam roofs that are popular in Europe and in the US. The S-5-E is a bit smaller and less expensive than the S-5-U, but every bit as strong. Designed to fit Butler's MR-24 and other double folded standing seam roofs.

S-5! S-5-E Mini Metal Roof Attachment Clamps for Double Folded Profiles

The S-5-E is designed specifically for double-folded standing seam roofs that are popular in Europe and in the US. The S-5-E is a bit smaller and less expensive than the S-5-U, but every bit as strong. Designed to fit Butler's MR-24 and other double folded standing seam roofs.
From $3.44

The S-5-E is designed specifically for double-folded standing seam roofs that are popular in Europe and in the US. The S-5-E is a bit smaller and less expensive than the S-5-U, but every bit as strong. Designed to fit Butler's MR-24 and other double folded standing seam roofs.

S-5! S-5-B Brass Attachment Clamps for Copper Roofs

The S-5!-B clamp allows architects to maintain the beautiful appearance of copper roofing. The brass clamp fits either traditional standing or batten seams.
From $15.63

The S-5!-B clamp allows architects to maintain the beautiful appearance of copper roofing. The brass clamp fits either traditional standing or batten seams.

S-5! S-5-B Brass Mini Attachment Clamps for Copper Roofs

The S-5-B Mini clamp allows architects to maintain the beautiful appearance of copper roofing. The brass clamp fits either traditional standing or batten seams.
From $10.54

The S-5-B Mini clamp allows architects to maintain the beautiful appearance of copper roofing. The brass clamp fits either traditional standing or batten seams.

S-5! S-5-T Attachment Clamps for T-Profile Metal Roofs

The S-5-T was specifically developed to fit certain profiles having a T-shaped seam configuration. Its two-piece design allows it to be easily installed anywhere along the length of the panel seam, and also works on architectural "angle-seam" or "single-folded" paneling.
From $6.84

The S-5-T was specifically developed to fit certain profiles having a T-shaped seam configuration. Its two-piece design allows it to be easily installed anywhere along the length of the panel seam, and also works on architectural "angle-seam" or "single-folded" paneling.

S-5! S-5-T Mini Attachment Clamps For T-Profile Metal Roofs

The S-5-T mini was specifically developed to fit certain profiles having a T-shaped seam configuration. Its two-piece design allows it to be easily installed anywhere along the length of the panel seam, and also works on architectural "angle-seam" or "single-folded" paneling.
From $6.05

The S-5-T mini was specifically developed to fit certain profiles having a T-shaped seam configuration. Its two-piece design allows it to be easily installed anywhere along the length of the panel seam, and also works on architectural "angle-seam" or "single-folded" paneling.

S-5! S-5-Z Attachment Clamps for Zip-Rib®, Kalzip®, and Bulb Seam Metal Roofs

The S-5-Z clamp is specially designed to fit Zip-Rib, Kalzip, and similar profiles that have a round "bulb" seam configuration. Its two-piece clamp design allows it to be easily installed anywhere along the length of the rib.
From $6.84

The S-5-Z clamp is specially designed to fit Zip-Rib, Kalzip, and similar profiles that have a round "bulb" seam configuration. Its two-piece clamp design allows it to be easily installed anywhere along the length of the rib.

S-5! S-5-Z Mini Attachment Clamps for Zip-Rib®, Kalzip®, and Bulb Seam Metal Roofs

The S-5-Z Mini clamp is specifically design to fit Zip-Rib, Kalzip, and similar profiles that have a round "bulb" seam configuration. Its two-piece clamp design clamp design allows it to be easily installed anywhere along the length of the rib.
From $6.05

The S-5-Z Mini clamp is specifically design to fit Zip-Rib, Kalzip, and similar profiles that have a round "bulb" seam configuration. Its two-piece clamp design clamp design allows it to be easily installed anywhere along the length of the rib.

S-5! S-5-H Attachment Clamps for Horizontal Seam Metal Roofs

The S-5-H clamp was specifically developed to securely and cost-effectively accommodate metal roof panels with a horizontal seam. The S-5-H is unique in that it allows for attachment to a horizontal seam on the vertical leg of the seam.
From $9.11

The S-5-H clamp was specifically developed to securely and cost-effectively accommodate metal roof panels with a horizontal seam. The S-5-H is unique in that it allows for attachment to a horizontal seam on the vertical leg of the seam.

S-5! S-5-H Mini Attachment Clamps for Horizontal Seam Metal Roofs

The S-5-H clamp was specifically developed to securely and cost-effectively accommodate metal roof panels with a horizontal seam. The S-5-H is unique in that it allows for attachment to a horizontal seam on the vertical leg of the seam.
From $6.99

The S-5-H clamp was specifically developed to securely and cost-effectively accommodate metal roof panels with a horizontal seam. The S-5-H is unique in that it allows for attachment to a horizontal seam on the vertical leg of the seam.