Unistrut has just introduced a new product--the P2580 Cantilevered Strut Bracket.
Designed to support heavier loads, increase the span between supports, and allow attachment on top and bottom, the Unistrut P2580 is 35% stronger than competing channel brackets on the market today.
Standard Dimensions:
- Hole Diameter: 9/16" (14mm)
- Hole Spacing (From End): 13/16" (21mm)
- Hole Spacing (On Center): 1-7/8" (48mm)
- Width: 1-5/8" (41mm)
- Thickness: 1/4" (6.4mm) with steel meeting or exceedingASTM A1011 SS GR 33, or 0.220" (5.6mm) with steel meeting or exceeding ASTM A1011 HSLAS GR 45
- Note: When used for mechanical supports, load capacities of brackets and fittings should be in compliance with the American Standard Code for Pressure Piping
| Part No. | Finish | Size |
|---|---|---|
| P2580-24 | GR | 24" |
| P2580-36 | GR | 36" |
| P2580-30 | GR | 30" |
| P2580-18 | GR | 18" |
| P2580-12 | GR | 12" |
| P2580-12 | HG | 12" |
| P2580-36 | HG | 36" |
| P2580-30 | HG | 30" |
| P2580-24 | HG | 24" |
| P2580-18 | HG | 18" |
| P2580-12 | SS | 12" |
| P2580-18 | SS | 18" |
| P2580-24 | SS | 24" |
| P2580-30 | SS | 30" |
| P2580-36 | SS | 36" |
To learn more about cantilevered strut brackets, or to request pricing on P2580 in various sizes and finishes, contact Unistrut Service Company for further assistance.
